Xtool D1 - User Manual

User Manual For xTool D1
xTool D1
User Manual
Statement
Thank you for choosing the xTool products!
If you use the product for the first time, read carefully all the accompanying materials of the
product to improve your experience with it. If you do not use the product according to the
instructions and requirements of the Manual, or mis-operate the product due to
misunderstanding, etc., Makeblock Co., Ltd. shall bear no responsibility for any loss resulting
therefrom, except for losses caused due to improper installation or operation by Makeblock
professional maintenance personnel.
Makeblock Co., Ltd. has collated the contents of the Manual rigorously and carefully, but
errors or omissions may remain.
Makeblock Co., Ltd. is committed to continuously improving product functions and service
quality, and therefore reserves the right to change any product or software described in the
Manual and the contents of the Manual at any time without prior notice.
The Manual is intended to help you use the product properly and does not include any
description of hardware and software configuration. For product configuration, refer to the
related contract (if any) and packing list, or consult your distributor. Images in the Manual are
for reference only and the actual product may vary.
Protected by copyright laws and regulations, the Manual shall not be reproduced or
transcribed in any way, or be transmitted on any wired or wireless network in any manner, or
be translated into any language without the prior written authorization of Makeblock Co., Ltd..
Warning
Physical injuries or damage to the machine may be caused if you do not
follow the instructions or principles.
Warning
Physical injuries or damage to the machine may be caused by laser light if
you do not follow the instructions or principles.
DECLARATION OF CONFORMITY

Summary

User Manual

Statement

Thank you note, usage disclaimer, and commitment to product improvement.

Declaration of Conformity

Declares compliance with essential requirements and relevant directives.

Safety Guidelines

General Safety Precautions

Read and follow all safety precautions before using the machine.

Laser Safety

Do not touch the laser when operating the machine as it has no protective cover.

Fire Safety

Understand fire risks from laser operation, ensure ventilation, and keep area clean.

Electrical Safety

Follow safety precautions related to electrical connections and maintenance.

Warning and Instruction Signs

Location and replacement of warning signs on the machine.

xTool D1 Assembly

Assemble xTool D1

Step-by-step guide for assembling the xTool D1 unit.

Product Identification

Meet your xTool D1

Overview of the xTool D1 components and features.

Device Connectivity

Powering On xTool D1

Connect to power and turn on the switch until the indicator is white.

Connecting to PC Software

Download software, connect via USB or Wi-Fi.

Wi-Fi Connection Mode

Connect via USB, then configure and add device with Wi-Fi name and password.

Laserbox App Setup

Connect xTool D1 to Laserbox App

Download the app and connect the device via USB then Wi-Fi.

First Engraving Guide

Engraving for the First Time

Steps for importing patterns, setting parameters, and starting the engraving process.

Advanced Features and Support

Function Extension

Information on adding optional modules for extended functionality.

After-sales Services and Warranty

Details on warranty periods for parts and customer support contact.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

The xTool D1 is a versatile laser engraving and cutting machine designed for creative projects. It allows users to engrave and cut various materials with precision, offering a platform for both hobbyists and professionals to bring their designs to life.

Function Description

The xTool D1 primarily functions as a laser engraver and cutter. It utilizes a high-density laser beam to irradiate material surfaces, heating them to vaporize without burning, or to cut through them. The machine is capable of performing both vector cutting and engraving tasks. It can be connected to a computer via USB or Wi-Fi, allowing for wireless control and operation through dedicated software. The device features a main control board, a laser head, motors for movement, and a guide rail system to ensure accurate positioning and movement of the laser. An annular indicator provides visual feedback on the device's status. The xTool D1 also supports function extension, such as the addition of a rotary roller engraving module for cylindrical items, expanding its capabilities beyond flat surfaces.

Usage Features

The xTool D1 is designed for ease of assembly and operation. Users are guided through a step-by-step assembly process, starting with fitting the side plates and then installing the middle plate, optical shaft components, and connecting various cables. Special attention is given to tightening screws for timing belts to ensure proper engraving and cutting quality. The machine's workspace should be clean and flat for optimal performance.

Before operation, users need to connect the xTool D1 to a power supply and turn it on. The device can be controlled through a PC using dedicated software, which can be downloaded from the xTool support website. Connection modes include USB and Wi-Fi. In Wi-Fi connection mode, the device's button can be used to start or stop tasks, while in USB mode, the button is disabled. The software allows users to import patterns, set pattern sizes, and adjust laser parameters such as power and speed. For mobile control, a "laserbox" app is available, which connects to the device via Wi-Fi, mirroring the PC software's functionality for pattern import and parameter adjustment.

A key feature for precise operation is the "Framing" function, which allows users to preview the engraving position on the material using cross-shaped light beams from the laser head. This helps in adjusting the material's position to ensure the pattern is engraved in the desired location. The focus ruler on the laser head assists in setting the correct focus for different materials.

Maintenance Features

Regular maintenance is crucial for the safe and efficient operation of the xTool D1. Users are advised to check the machine for any damage or defects before each use and to ensure the workspace is clean and flat. The laser tube, being made of glass, is fragile and requires careful handling.

Cleaning the operating area of the machine regularly is emphasized, as accumulated residues and chippings from cutting and engraving can be dangerous and may cause fire. The area around the machine should be kept free of cluttered flammable materials, explosives, or volatile solvents. Having a fire extinguisher readily available and performing regular inspections of it is also recommended.

The manual explicitly warns against disassembling the machine or changing its structure without authorization, as well as modifying or decompiling its operating system. It also specifies the optimal operating temperature range (0°C to 35°C) and storage temperature range (0°C to 45°C) to ensure proper functioning and longevity of the device.

For after-sales services, the manual outlines warranty periods for different components: 12 months for main parts (PCB, motor, laser head, guide rail) and 3 months for wearing parts (power adapter, conveyor belt). Consumables like power cords, USB cables, and user guide cards are not covered under warranty. The warranty period is based on the purchase date on the receipt, or from the ex-factory date if no valid invoice is provided. Users are directed to the xTool support website for more information on after-sales services.

Xtool D1 Specifications