Xtool D1 User Manual

Read the following warnings and suggestions carefully:
￮ Do not open any access panels when the machine is connected to a power supply.
￮ Do not touch any electronic area with your hands or other tools when the machine is
connected to a power supply.
5. Warning and instruction signs
On xTool D1, the warning and instruction signs are labelled where physical injuries or
damage to the machine may be caused before and/or during operation. If a sign is damaged or
lost, replace it immediately. You can use the following template to print the sign you need.
Packing list

Xtool D1 Specifications

General

Working Current	5A
Laser Power	10W
Engraving Speed	10000mm/min
Supported Materials	Wood, Leather, Paper, Plastic
Software Compatibility	LightBurn
Connectivity	USB, Wi-Fi
Focus Adjustment	Fixed focus laser (adjust focus by adjusting the height of the laser)