Need help?Do you have a question about the Xtool D9 Smart and is the answer not in the manual?
General| Brand | Xtool |
|---|---|
| Model | D9 Smart |
| Category | Diagnostic Equipment |
| Language | English |
Details about the main unit of the D9 Smart Diagnosis System.
Description of the various ports available on the main unit.
Information about the Vehicle Communication Interface (VCI) box.
Key technical specifications of the D9 Smart Diagnosis System.
List of items included in the product package.
Description of the main operating interface of the device.
Overview of the device's operating system and home screen.
Descriptions of the various application icons available on the device.
How to configure Android system settings like network, language, and battery.
Introduction to the primary diagnostic application and its functions.
Detailed descriptions of the function buttons available in the main menu.
Explanations of the navigation bar buttons at the bottom of the screen.
Process for selecting the device's operating system language.
Steps for connecting the device to a Wi-Fi network.
How the system downloads software in factory mode after Wi-Fi connection.
Process for activating the device, including user agreement and email input.
Confirmation of successful device activation and entry into the diagnostic system.
Details on updating various vehicle diagnostic software packages.
Steps for connecting the VCI box and tablet to the vehicle for diagnosis.
Detailed instructions for connecting the diagnostic components.
Automatically identifying the vehicle using VIN code for diagnosis.
Manually selecting vehicle brand, year, and model for diagnosis.
Diagnosing the vehicle based on specific system selection.
Reading version information, models, and production date of the ECU.
Reading and interpreting fault codes stored in the ECU.
Clearing current and historical trouble codes from the ECU.
Monitoring real-time vehicle operating parameters.
Performing bidirectional controls and system tests on vehicle modules.
Capturing and analyzing snapshot data when a failure occurs.
Resetting the engine oil life system based on driving conditions.
Resetting the Electronic Parking Brake system and related components.
Calibrating the Steering Angle Sensor for accurate steering position.
Managing Diesel Particle Filter regeneration and teach-in procedures.
Resetting the Battery Management System for battery replacement.
Setting initial parameters for throttle actuators.
Resetting Tire Pressure Monitor System after sensor replacement.
Bleeding the ABS system to restore brake sensitivity.
Writing identification codes for fuel injectors to the ECU.
Re-matching the engine and gearbox after replacement.
Adjusting vehicle body height and calibrating suspension systems.
Restoring initial memory and automatic functions for power windows.
Matching seats with memory functions after replacement or repair.
Initializing adaptive headlight systems after replacement.
Activating hidden functions and configuring ECUs for different vehicle levels.
How to change the device's application language.
How to switch between metric, imperial, and U.S. units.
Checking and managing the Bluetooth connection status.
Inputting and displaying workshop information in reports.
Viewing and updating VCI firmware information.
Displaying serial number and application version information.
Step-by-step instructions for obtaining remote assistance.
Details on the device's compliance with radio wave exposure guidelines.
To Next Page
