function.
Battery matching is performed to re-match the control module and
motoring sensor to detect battery power usage more accurately,
which can avoid an error message displayed on the instrument
cluster.
The operation guidelines of the BMS Reset function are shown below:
1. Enter the BMS Reset menu and choose relevant models according to
the vehicle being tested.
2. Turn on the ignition switch.
3. Press OK to continue the BMS function.
4. Enter battery capacity (within the given range) and press OK after
the input.
Figure 5-17 Sample of BMS function (screen 1)
5. Enter the battery manufacturer and press OK after the input.
To Next Page
Loading...
