Xtool IP616 User Manual

46
Figure 5-23 Sample of injector coding function (screen 2)
5. Enter the Change the value of cylinder menu of the replaced
injector(s), enter the new 5-digit value, and then press OK.
Figure 5-24 Sample of injector coding function (screen 3)
6. Wait until the message ‘Write successfully’ pops up.
7. Turn off the ignition switch.
8. Wait until the message asked you to turn on the ignition switch.
9. Re-enter the Fuel injection nozzle injection volume adjustment

Xtool IP616 Specifications

General

Brand	Xtool
Model	IP616
Category	Diagnostic Equipment
Language	English