Xtool P2 Instructions

8 9
13
14
16
17
12
15
19
18
Distant-view camera
Extension port
Slat
Close-view camera
Network port
Baseplate
Laser module
USB port (Type-C)
xTool Creative Space
xtool.com/software
Use xTool P2
You can start your creation after connecting them.
For details about how to use XCS to operate xTool P2, see support.xtool.com.
1. Download and install xTool Creative Space (XCS)
2. Connect xTool P2 to your computer and connect it to XCS
18
15
12
13
14
19
16
17
Connect
device

Xtool P2 Specifications

General

Laser Type	Diode Laser
Laser Power	55W
Maximum Engraving Speed	600mm/s
Camera	Yes
Connectivity	USB, Wi-Fi
Software	XCS (xTool Creative Space)
Supported File Formats	SVG, DXF, JPG, PNG, BMP
Supported Materials	Wood, Acrylic, Fabric, Leather, Paper, Rubber
Safety Features	Emergency Stop
Focus Adjustment	Autofocus
Power Supply	AC 110-240V, 50/60Hz