Xtralis VESDA LCD Programmer Product Guide Xtralis VESDA
®
20 www.xtralis.com
40. Miscellaneous -
• UL Version - A against this indicates that the device is set to meet UL
specifications.
• Latch Alarms - This provides a YES/NO option to latch/unlatch all Alarms
• Latch Faults - This provides a YES/NO option to latch/unlatch all Faults
• GP Input - The GP Input permits setting the general purpose input functions.
For details on GPI functions please refer to the VLP Detector Guide.
ADM
DST
41. VLS Detector - Lists functions available for accessing and managing the
properties of the selected VLS detector. Select the required option and press .
USR
42. Status - Displays the current Status of the Address
• Smoke Level - Displays the current smoke level in the VESDA Zone
• Alarms - If the detector is in alarm mode, the alarm stage is displayed
• Faults - List of faults generated for each device assigned to the Address
• Isolated - The isolated status is reported if the detector has been isolated
• Current% Flow - Reports the current percentage of air flow through each pipe
• SW Version - Displays the Software Version in the detector
• Cfg Code - This is a configuration code set during production
USR
43. Scan Status - This screen shows the smoke level for each sector in use during a
scan sequence (automatic or manual).
USR
44. Event Log -
• View Events
• Select Events
USR
45. View Events - Lists a log of events USR
Scrn
No.
Description
Min.
Access
Level
Parameter Default
UL Version Enabled
Latch Alarm Enabled
Latch Fault Enabled
↵
To Next Page
Loading...