Need help?Do you have a question about the Xtralis VESDA-E VEU-A00 and is the answer not in the manual?
General| Model | VEU-A00 |
|---|---|
| Type | Aspirating Smoke Detector |
| Number of Sampling Pipes | 4 |
| Number of Pipes | 4 |
| Air Sampling Type | Aspirating |
| Sensitivity Range | 0.005% obs/m to 20% obs/m |
| Maximum Coverage Area | 2000 m² |
| Power Supply | 24 VDC |
| Supply Voltage | 18 to 30 VDC |
| Communication | Ethernet |
| Communication Interface | Ethernet |
| Air Flow Monitoring | Yes |
| Relative Humidity | 10% to 95% (non-condensing) |
Important safety precautions for installation, configuration, and maintenance to prevent injury or damage.
Details FCC, FDA compliance, and regional requirements for air sampling smoke detection.
Overview of detector features, components, operation, specifications, and dimensions.
Guides on designing and installing the pipe network, including design and installation considerations.
Covers preparing the detector, mounting methods (bracket, template, inversion), and wiring.
Details the procedure for powering up the detector and performing preliminary system checks.
Describes establishing communication via USB, Ethernet, WiFi, and VESDAnet, including profile setup.
Details configuration settings for General, VESDAnet, Ethernet, WiFi, Smoke Thresholds, Airflow, GPI, and Relays.
Outlines security levels, authentication, and access control using passwords and PINs.
Guides through detector commissioning, including AutoLearn processes and smoke tests.
Provides a maintenance schedule and procedures for replacing components and routine checks.
Lists the detector's field-replaceable internal components and their ordering numbers.
Guides on identifying and resolving fault conditions using the Fault LED and Xtralis VSC software.
Provides templates for commissioning, test results, and definitions of document terms.
To Next Page