What to do if my XtraVac XtraVac860A Packaging equipment has insufficient vacuum?
If your XtraVac Packaging equipment isn't creating a sufficient vacuum, several factors could be at play. First, check the vacuum oil level and fill if necessary. If the oil quality has deteriorated, replace it. Also, inspect the rubber gasket for any damage and replace it if needed.
Why is there poor sealing on the bag mouth of my XtraVac XtraVac860A?
If the sealing on the bag mouth of your XtraVac Packaging equipment is poor, it's likely that the heating wire is burned out. Replacing the heating wire should resolve this issue.
How to fix an incomplete sealing line on XtraVac XtraVac860A Packaging equipment?
If the sealing line on your XtraVac Packaging equipment is incomplete, the heat-resistance cloth may be damaged. Replacing the heat-resistance cloth should solve this problem.
General| Brand | XtraVac |
|---|---|
| Model | XtraVac860A |
| Category | Packaging equipment |
| Language | English |
Safety steps for moving, setting up, and packing the machine.
Steps and checks required before and after operating the vacuum machine.
Details about the machine's construction, design, and capabilities.
Explains the primary purposes and operational benefits of the vacuum machine.
Lists suitable products and materials for vacuum packaging.
Information on where to find and understand machine labels and markings.
Technical data and dimensions of the XtraVac860A model.
Displays the current memory set number (e.g., "3" for the 3rd set).
Shows the current setting for vacuum time in units of 1/s.
Shows the current setting for nitrogen filling time in units of 1/s.
Shows the current setting for sealing time in units of 0.1/s.
Shows the current setting for cooling time in units of 0.1/s.
Button used for modifying memory functions.
Button used for locking memory functions.
Key reserved for future use.
Makes timing function stop and releases the upper lid.
Button used to increase time settings.
Button used to decrease time settings.
Step-by-step guide for performing an initial test run of the machine.
Step-by-step guide for operating the vacuum packaging machine.
Instructions on how to use the pressure adjusting valve and FRL components.
Procedures for cleaning, oil replacement, and general upkeep of the machine.
Identifies common problems, their causes, and recommended solutions.
Lists standard and optional accessories included with the machine.
Specifies the noise emission level of the machine in decibels.
Recommended temperature and humidity for storing the machine.
Specifies the ideal environmental conditions for operating the machine.
To Next Page
