Need help?Do you have a question about the Xtreem ATOM II and is the answer not in the manual?
General| Brand | Xtreem |
|---|---|
| Model | ATOM II |
| Category | Quadcopters |
| Language | English |
Keep small parts out of reach of children to prevent choking.
Avoid inserting sharp objects into the quadcopter to prevent battery puncture.
Do not fly the quadcopter near eyes or face.
Do not touch running rotors or fly over people's heads.
Keep clear of rotors, use flat surfaces, maintain line of sight, and power off when not in use.
Covers controller battery installation and LiPo battery handling.
Identifies key controls like sticks, buttons, and trims for operating the quadcopter.
Instructions on connecting the Atom to a power source for charging via USB.
Important notes on turning off the Atom, USB port compatibility, and charge indicators.
Ensure the Atom is placed on a stable, level surface to maintain auto-stabilization.
Steps to successfully link the controller with the Atom for takeoff.
How to switch between Mode 1 (default) and Mode 2 on the controller.
Explains basic flight controls (Up, Down, Rotate, Forward, Backward, Side to side) in Mode 1.
Explains basic flight controls (Up, Down, Rotate, Forward, Backward, Side to side) in Mode 2.
How to use trim buttons to correct unwanted sideways or rotational movement.
Procedure to reset all trim settings back to their original default positions.
How to activate and use Instinctive mode for easier orientation control.
Toggle between high and low speed modes for different flying experiences.
Guide on how to execute a 360-degree flip stunt with the Atom.
Securing propellers, making small adjustments, and practicing hovering for stable flight.
Safely landing the Atom by gradually reducing throttle and handling low battery situations.
Executing turns, tricks, and 360° pirouettes using control stick movements.
Inspect and clean rotors with a soft brush; wipe the toy with a damp cloth.
Do not submerge the toy in water as it will damage electronic components.
Remove batteries from the controller when not in use for extended durations.
Atom status lights blinking indicates a need to recharge the battery.
If rotors spin but the Atom doesn't lift, check for damaged rotor blades and replace them.
Correct drifting by cleaning rotors, adjusting trims, or recalibrating the gyro sensor.
A beeping controller signifies that the batteries need to be replaced.
Outlines the conditions for compliant operation according to FCC Rules Part 15.
To Next Page
