www.xtremevisionsecurity.com
SMART ALARM SYSTEM
The Smart Alarm control panel is a GSM Control Unit. It can be wireless paired with all security accessories like PIR
motion sensor, Door contact, IP camera, smoke sensor, siren, etc.,
Insert SIM card and connect the power cable
• On the back of the panel, Open the cover, You will see a slot for your SIM card. Insert the
SIM card and connect the power cable.
POWER ON
• Flip the switch on the back of the panel to the ON position. Wait 20 seconds as the system
runs a start-up diagnostic with a welcome screen.
To Next Page
Loading...