XtremeMac Tango User Manual

TANGO™ User Manual
5 I English
Setup
1. Open Tango’s box. Here’s what’s inside:
2. Put Tango on a solid, level surface.
3. Use the Universal Dock Adapter that came with your iPod.
Install it in the Universal Dock Well on top of Tango.
Additional Universal Dock Adapters are available from Apple.
4. Attach power adapter cord.

XtremeMac Tango Specifications

General

Magnet type	Neodymium
Audio output channels	2.1 channels
I/O ports	3.5mm line out S-Video output
Subwoofer frequency range	32 - 208 Hz
Satellite speaker frequency range	150 - 20000 Hz
Impedance	20000 Ω
Signal-to-Noise Ratio (SNR)	75 dB
Total Harmonic Distortion (THD)	0.1 %
Product color	White