XtremepowerUS 90151 - Electrolytic Cell Maintenance

Maintainandcleanchlorinegeneratorelectrolyticcell
Beforetaking out the electrolytic cell,disconnect the power supply ofchlorine generator.
After removal, check whether there is scaling (light-colored hard skin or flaky sediment)
between titanium plates and some debris stuck on the electrode plate of the electrolytic
cell. If there is sediment, try to rinse it off with a high-pressure water pipe. If this is not
successful,the electrolytic cell may need to be replaced. Titaniumscaleindicates that the
poolisatahighcalciumlevel.Ifthiscannotbecorrected,itneedstocleantheelectrolytic
cellregularly.
6.Replacetheflowswitch
After long-term usage, the water flow switch may be damaged. We provide accessories
thatcanbedirectlyreplaced.Pleaserefertothefollowingfiguresforreplacement.
Unscrew the external flow switch, reinstall and connect it to the controller. Pay
attentiontothedirectionofflowswitchinstallationwhenreplacing
8