XTZ 70.12 - Mounting and Connecting Tips; Mounting and Connections

- 8 -
Mounting and connecting tips
Mounting options
Normally the XTZ 70.12 is placed
on stands or on
the walls
. The wall behind affect the reproduction
of the speaker and characteristics. Please take your
time to try out the best placement.
Correct phase when
connecting
Always make sure the speaker is connected
in
respect of the correct phase. The + terminal of the
amplifier should be connected to the + terminal of
the speaker.
If the speaker is incorrectly
connected to
the amplifier, there is no risk of damage or
danger. However, the sound will not be
reproduced correctly.
Overloading
After playing at a very high sound level for a
prolonged period of time there
is a risk of
damaging the speakers and/or the amplifier.
Initial use of your
speakers
The drivers of a loadspeaker require about 20 to 3
0
hours of use before the full quality level is reached.
During this time the speaker can be used normally.