XTZ 89 FRONT - Mounting and connecting tips; Correct phase when connecting; Overloading; Initial use of your speakers

- 8 -
Mounting and connecting tips
Mounting options
Normally the XTZ 89 FRONT
is placed near a
TV set or a projector screen. The wall behind
affect the reproduction of the speaker and
characteristics. Please take your time to try
out the best placement.
Spikes
The XTZ 89 FRONT
is equipped with rubber feet,
intended for vibration-
muffling, making the use of
spikes unnecessary.
.
Correct phase when
connecting
Always make sure the speaker is connected
in respect of the correct phase. The +
terminal of the amplifier should be
connected to the + terminal of the speaker.
If the center speaker is
incorrectly connected to the
amplifier, there is no risk of
damage or danger. However,
the sound will not be
reproduced correctly.
Overloading
After playing at a very high sound level for a
prolonged period of time there is a risk of
damaging the speakers and/or the
amplifier.
Initial use of your
speakers
The drivers of a loadspeaker require
about
50 to 100
hours of use before the full quality
level is reached.
During this time the
speaker can be used normally.