4.2.4 .1 System
4.2.4.1.1 General
Go to “Main Menu” → “System” → “General” to enter into the interface.
4.2.4.1.2 DST
Go to “Main Menu” → “System” → “General” → “DST” to enter into the interface.
4.2.4.1.3 NTP
Go to “Main Menu” → “System” → “General” → “NTP” to enter into the interface.
Enter into the interface to set
DST, Time Offset, Start Time and
End Time.
NTP service: Enable/Disable NTP function.
Server Address: Select the NTP
servertime.windows.com,time.nist.gov,
pool.ntp.org）.
Time Zone: Corresponding time zones for
various nations or regions.
Update Time: Enable the NTP function and
save parameters and click Update Time to
calibrate the system time.
Note: When the NTP function is set to
“Enable”, system will calibrate the system
time at every 00:07:50 and every start-up.
The user may set Date, Time,
Date Format, Time Format,
Language, Video Format, Menu
Timeouts enable Show Wizard on
this page.
To Next Page
Loading...
