TROUBLESHOOTING
NO SOUND
• Check that the Transmitter and Receiver are connected
properly, and that their power switches are turned on.
• Check your instrument’s volume knob to make sure that
signal is being sent to the Transmitter.
• Check that your amplier or other receiving device is on,
with volume up.
• Ensure that the Transmitter and Receiver are set to the
same channel.
• Check that the Receiver's RF LED is on.
DISTORTED AUDIO
• If the output volume of your guitar or bass seems really
high, switch to Active mode
LOW AUDIO OUTPUT
• When using a passive instrument, make sure your
Transmitter is set to Passive mode.
SIGNAL INSTABILITY: RF LED FLICKERING
• See page 14: “5.8 GHz Wireless Overview and Interference”.
• Hold on the Receiver switch button for 3 seconds to scan
for the best wireless channel.
MULTIPLE CONNECTIONS
• Make sure the receivers are both set to the same channel
as the transmitter you want them to receive audio from.
17
To Next Page
Loading...
