Xvive A58 - Specifications

Passive Mode Input
Working Range
Audio Frequency
Response
Battery Life
RF Sensitivity
Total Harmonic Distortion
RF Output Power
Operating
Temperature Range
Channel Count
Maximum Level
Sample Rate
Dynamic Range
Signal-To-Noise Ratio
Latency
Charging Voltage &
Current
lmpedance
Input and output
connector
Dimensions
Weight
Passive mode input: 2.84Vp-p，
Active mode input: 7.5Vp-p，
volume -10 dB
24-bit / 48 KHz
110 dB
110 dB
5 ms
5V / 2A
Input: 1 MΩ Output: 470 Ω
1/4” / 6.5 mm TS jack
65 mm x 37 mm x 28 mm / 2.6” x 1.5” x 1.1”
88 g / 3.1 oz
5.8 GHz
>100 feet line-of-sight outdoors. Actual
range depends on RF signal absorption,
reection and interference
20 Hz – 20 KHz (-3 dB)
Up to 5 hours
(3.8V rechargeable Li-ion, 780 mA)
-90 dBm
0.1%
25 mW E.I.R.P. max
0ȭ to 45ȭ. Battery characteristics
may limit this range
Six: up to six A58 sets can be used
simultaneously in one area
SPECIFICATIONS
16