To Next Page
J
Jasmine LloydAug 3, 2025
What to do if Xylem Security Sensors leakage alarm tripped?
- JjwhiteAug 3, 2025
To check which sensor activated the leakage alarm in Xylem Security Sensors, remove the relay from its socket and then re-insert it.
What to do if Xylem Security Sensors leakage alarm tripped?
To check which sensor activated the leakage alarm in Xylem Security Sensors, remove the relay from its socket and then re-insert it.
How to check for earth fault in Xylem FLYGT MiniCAS II?
To check for an earth fault in the sensor circuit of Xylem Security Sensors, measure the resistance value. If the value is less than one megaohm, inspect the circuit wiring in the pump, as a lower value indicates an earth fault.
General| Brand | Xylem |
|---|---|
| Model | FLYGT MiniCAS II |
| Category | Security Sensors |
| Language | English |
Provides an overview of the manual's purpose and general cautions.
Explains hazard levels and symbols for safe operation and handling.
Covers general safety regulations and specific electrical hazard prevention measures.
Details warranty coverage, limitations, and the process for making a claim.
Information regarding supported products and equipment.
Instructions for inspecting packages and products upon receipt for damage or missing items.
Explains the MiniCAS II's purpose, function as a monitoring relay, and sensor types.
Identifies the physical components of the MiniCAS II unit.
Lists the various MiniCAS II versions and their associated certifications and part numbers.
Warning against using the unit in environments with flammable or aggressive substances.
Instructions for wiring and connecting the MiniCAS II to the pump control panel.
Guidance on using filters to prevent VFD interference with CLS sensors.
Procedure for testing sensor output current using a multimeter.
Defines current levels associated with the SUPPLY LED and different alarm types.
Details symptoms, causes, and remedies for LED indicators on the MiniCAS II.
Explains how to reset the relay after leakage or overtemperature alarms.
Steps to diagnose and identify earth faults within the sensor wiring.
Methods to determine if the FLS or CLS sensor triggered the leakage alarm.
Procedures for simulating normal and fault conditions to test relay functionality.
Provides the physical dimensions of the MiniCAS II unit.
Specifies the operational temperature and humidity limits for the device.
Lists key electrical specifications including supply voltage, tolerances, and contact ratings.
Diagram and list of terminal connections for the MiniCAS II.
Explains the operational logic and connections for different relay functions.
Details various sensor configurations and their corresponding 'no fault' and 'leakage' current values.
Illustrates how to connect filters for different filter part numbers.
Provides a list of filter kits and their corresponding drive unit compatibility.
