1 Introduction and Safety
1.1 Introduction
CAUTION:
• Read this manual carefully before installing and using the product. Improper use of the
product can cause personal injury and damage to property, and may void the
warranty.
• In addition to these instructions, also pay attention to universal safety and accident
prevention regulations.
• Save this manual for future reference, and keep it readily available at the location of
the system controller.
Purpose of this manual
The purpose of this manual is to provide the necessary information for:
• Installation
• Operation
• Maintenance
1.2 Safety terminology and symbols
About safety messages
It is extremely important that you read, understand, and follow the safety messages and
regulations carefully before handling the product. They are published to help prevent
these hazards:
• Personal accidents and health problems
• Damage to the product
• Product malfunction
Hazard levels
Hazard level Indication
DANGER:
A hazardous situation which, if not avoided, will result in
death or serious injury
WARNING:
A hazardous situation which, if not avoided, could result
in death or serious injury
CAUTION:
A hazardous situation which, if not avoided, could result
in minor or moderate injury
NOTICE:
• A potential situation which, if not avoided, could
result in undesirable conditions
• A practice not related to personal injury
Electrical hazards
Electrical hazards are indicated by the following specific symbol. This symbol warns for
presence of a dangerous voltage.
1 Introduction and Safety
2 MiniCAS II Installation, Operation, and Maintenance Manual
To Next Page
Loading...