Xylem JABSCO 29120-5000 User Manual

Compact Bowl Model:
29090-5000 Wooden Seat
Regular Bowl Models:
29120-5000 Wooden Seat
29120-5100 Soft Close Seat
Twist ‘n’ Lock
Manual Toilets
FeaturesApplications
Design
You may install JABSCO
Regular and Compact bowl
manually operated marine
toilets in both power and
sailing craft, either above
or below the waterline, for
use on sea, river, lake or
canal.
Your installation may
discharge the waste either
overboard (provided that
your national and local
regulations allow this), or
into a treatment system or
into an on-board holding
tank (U.S.C.G. Marine
Sanitation Devices Type
I, II and III).
JABSCO manual toilets are
designed specically for
marine use. Consult Jabsco
Industries for advice about
possible non-marine
applications.
Optional re-assembly
by installer for left
hand operation.
Materials
Performance
Dimensions
• Twist ‘n’ lock action safety handle guards against ooding and waste backow by
locking the waste outlet valve shut.
• Reversible pump mounting allows re-assembly for left hand operation by installer.
• Powerful self-priming, double-acting piston pump.
• Strong swirl action for efcient ushing.
• Crevice free contours and skirted base for added cleanliness and hygiene.
• Contoured handle and conveniently positioned ush control lever for ease of use.
• Angled pump housing and long stroke for easier pumping.
• Spring assisted top valve closure for easier priming.
• Automatic vacuum breaker operated by ush control lever for easier bowl emptying.
• Constant 38mm (11/2”) bore waste path minimises blockages.
• Aortic joker valve combines full 38mm (11/2”) bore with automatic backow
prevention.
• Multi-angle discharge elbow for ease of installation.
• Accessible mounting points for faster installation.
• All fastenings face front or top for superbly simple servicing without need for special
tools.
• Renewable external seal housing for quick, clean replacement of seal and piston
rod guide.
• Positively located gaskets ensure correct re-assembly.
• Dual function base plug combines winter drain point with easy cleaning access.
• Baked enamel wooden seat - Luxury thermoset soft close seat on selected
models.
• Hygienic white ceramic bowl for ease of cleaning.
• Pump and base moulded in ABS or polypropylene with selected parts in acetal
resin, tted with 316 passivated stainless steel fastenings, brass weights and
neoprene seals and gaskets.
• Flushing pump self-primes from dry up to 1 metre (3ft) below the base.
• Waste pump discharges up to 3 metres (9ft) above the base.
• See the Dimensional Drawing on the back page.
1

Xylem JABSCO 29120-5000 Specifications

General

Model	29120-5000
Type	Electric Marine Toilet
Voltage	12V DC
Flush Control	Push Button
Pump Type	Macerator
Material	plastic components

Summary

Applications

Discharge Options

Summarizes options for discharging waste overboard or into systems.

Features

Design

Details the functional and ergonomic aspects of the toilet design.

Materials

Lists the materials used in the toilet construction for durability.

Performance

Outlines the flushing and discharge capabilities of the toilet.

Installation Instructions

Re-assembly for Left Hand Use

Guide to reconfiguring the pump assembly for left-hand operation.

Location and Mounting

Specifies requirements for toilet placement and secure mounting.

Through-Hull Fittings

Instructions for installing necessary seacocks and fittings.

Pipework Selection and General Instructions

Guidance on choosing and installing pipework, including safety.

Inlet Pipework Options

Specific inlet pipework configurations for different water levels.

Outlet Pipework Options

Specific outlet pipework configurations for various discharge methods.

Operating Instructions

First Use and Normal Operation

Steps for initial use and routine operation.

Cleaning and Disinfection

Guidelines for cleaning and disinfecting toilet components.

Servicing and Winterisation Preparation

Preparation Steps

Initial steps for servicing, including flushing and draining.

Servicing Instructions

Seal Replacement

Procedure for replacing worn seals in the pump assembly.

Winterisation

System Draining and Protection

Instructions for draining the system for winter protection.

Overhaul and Testing

Guidance on overhauling components and testing after servicing.

Trouble Shooting

Common Issues and Solutions

Addresses common problems like bowl filling or pump issues.

Dimensions and Weights

Spare Parts List