Xylem YSI ProOBOD - Table of Contents

Item #626471
Rev C
Drawing # A626471
April 2013
©2013 YSI Incorporated.
The YSI, ProODO, OBOD and ODO logos are registered trademarks of
YSI Incorporated.
CONTENTS
Warranty ................................................................................................i
Introduction .........................................................................................1
Getting Started ....................................................................................2
Unpacking the OBOD Probe ................................................3
OBOD Probe Operation .....................................................................4
Powering the Stirrer ...............................................................4
Calibration - Dissolved Oxygen ............................................ 4
Temperature ...........................................................................5
Taking Measurements ............................................................ 5
Maintenance and Storage ..................................................................5
Updating Instrument and Probe Firmware ..........................6
Sensor Maintenance - Dissolved Oxygen ............................6
Sensor Maintenance - Temperature .....................................8
Sensor Storage .......................................................................9
Troubleshooting ..................................................................................9
Dissolved Oxygen Readings .................................................9
Error/Status messages ........................................................11
Probe Specifications ..........................................................................11
Accessories / Parts List ......................................................................12
Declaration of Conformity ................................................................13
Recycling ............................................................................................14
Contact Information ..........................................................................14
Ordering and Technical Support ........................................14
Service Information ..............................................................15
Appendix A - DO% Calibration Values ............................................16