Xyron 1200 User Manual

The Xyron 850 / Xyron 1200 is designed to be used with one of
the following replacement cartridges:
SL/DL: Double- and single sided lamination.
LAT: Front lamination with adhesive transfer on the reverse.
AT: Single - sided adhesive transfer.
Please follow the attached directions carefully.
Important Notice :
Your Xyron 850 / Xyron 1200 system is designed to permanently
attach a clear film or adhesive to the front and/or back of any
substrate that is run through the machine. The lamination film and
adhesive are not designed to be removed without substantial
damage to the laminated substrate. This process is NOT
recommended for any precious or single source documents.
User's Guide
Xyron Adhesive Application &
Laminating System
XYRON
®
850
XYRON
®
1200
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500

Xyron 1200 Specifications

General

Brand	Xyron
Model	1200
Category	Laminator
Language	English

Summary

Parts and Functions

Machine Components Overview

Identifies key parts like the document feed paddle, handle, output location, feed tray, roller springs, and cut blade.

Setting Up the System

Instructions for installing the document feed tray and preparing the machine for operation.

Basic Operation Guide

Step-by-step instructions for feeding documents and completing the application process.

Cartridge Replacement Procedures

Installing New Cartridges

Detailed steps for inserting and aligning a new supply cartridge, ensuring wrinkle-free film.

Using Part-used Cartridges

Instructions on attaching a starter tool to partially used cartridges for continued use.

Xyron Supply Catalog

Laminating Cartridges

Lists available DL and SL series cartridges for single or double-sided lamination.

Adhesive Application Cartridges

Details AT series cartridges for permanent or repositionable adhesive transfer.

Combination Cartridges

Lists LAT series for lamination/adhesive and LM series for lamination/magnet backing.