Do you have a question about the Xyron 850 and is the answer not in the manual?
Type | Cold Laminator |
---|---|
Laminating Width | Up to 9 inches |
Laminating Thickness | 5 mil |
Weight | 3.5 lbs |
Release Lever | Yes |
Automatic Shut-off | No |
Input Power | None (manual operation) |
Applications | Photos, documents |
System permanently attaches film/adhesive; removal may damage substrates. Not recommended for precious or single-source documents.
Identifies and describes key components: cartridge, feed paddle, handle, output, feed tray, roller springs, and cut blade.
Instructions for unpacking and installing the feed tray into the Xyron system for initial setup.
Step-by-step guide for inserting, feeding, and trimming documents using the Xyron system.
Procedure for inserting a new supply cartridge, aligning the leader, and advancing the film.
Steps for using a starter tool to install a partially used cartridge and align the film correctly.
Lists available laminating, adhesive application, and combination cartridges for the XYRON 850 model.
Lists available laminating, adhesive application, and combination cartridges for the XYRON 1200 model.
Provides Xyron technical hotline numbers, fax, website, and company addresses for USA, Europe, and Asia.