Need help?Do you have a question about the XYZ Printing da Vinci 2.0 Duo and is the answer not in the manual?
General| Printing Technology | Fused Filament Fabrication (FFF) |
|---|---|
| Build Volume | 200 x 200 x 200 mm |
| Layer Resolution | 100 - 400 microns |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Software | XYZware |
| Number of Extruders | 2 |
| Filament Compatibility | PLA, ABS |
| Power Requirements | 100-240V, 50/60Hz |
To Next Page
