Need help?Do you have a question about the XYZ Printing da Vinci 2.0 Duo and is the answer not in the manual?
General| Printing Technology | Fused Filament Fabrication (FFF) |
|---|---|
| Build Volume | 200 x 200 x 200 mm |
| Layer Resolution | 100 - 400 microns |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Software | XYZware |
| Number of Extruders | 2 |
| Filament Compatibility | PLA, ABS |
| Power Requirements | 100-240V, 50/60Hz |
Safety precautions regarding electrical hazards, stability, objects, chemicals, disassembly, heated surfaces, and servicing.
Precautions for ventilation, filament type, power switch, and moving parts during operation.
Steps for unpacking the printer, including removing accessories, packaging, and securing parts.
Crucial safety instructions for connecting power and USB cables, including avoiding power strips.
Instructions on how to correctly power on the printer after connecting cables.
Explanation of buttons and their functions for navigating the printer's control panel.
Procedures for installing and loading filament cartridges.
Instructions for recalibrating the print bed for optimal printing.
To Next Page
