Need help?Do you have a question about the XYZ Printing da Vinci 1.0 and is the answer not in the manual?
General| Print Technology | Fused Filament Fabrication (FFF) |
|---|---|
| Build Volume | 200 x 200 x 200 mm |
| Layer Resolution | 100-400 microns |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB 2.0 |
| Supported Materials | ABS |
| Dimensions | 468 x 510 x 558 mm |
| Supported File Types | STL |
| Display | LCD |
| Operating System Compatibility | Windows, Mac |
| Power Requirements | 100-240V, 50-60Hz |
Provides crucial safety warnings regarding printer operation, electrical hazards, and proper handling.
Details operational precautions for ventilation, filament use, and device handling during operation.
Key instructions to follow before operating the printer for the first time.
Step-by-step guide for unpacking the da Vinci 1.0 3D printer and removing packaging.
Identifies and describes the various components and parts of the da Vinci 1.0 3D printer.
Illustrates the front, left, top, right, rear, and bottom views of the printer.
Guide on connecting the printer's power cord and USB cable to a computer.
Instructions on how to power on the printer after connecting the cables.
Steps to install the filament cartridge into the printer slot and secure it.
Detailed steps on navigating the printer menu to load filament and wait for heating.
Instructions on how to select and print a pre-loaded sample object.
Procedure for safely unloading filament from the extruder and cartridge.
Explains the functions of each button on the printer's control panel for navigation.
Overview of core printer functions: UTILITIES, SETTINGS, and INFO.
Details core utility functions: changing filament, homing axes, jog mode, and building samples.
Step-by-step guide for loading filament, including waiting for extruder heating and filament output.
Detailed instructions for unloading filament, including heating the extruder and pulling filament.
Guide on performing the 'Home Axes' function to move the extruder and bed to default positions.
Instructions on using Jog Mode to manually adjust the printer's X, Y, and Z axes.
Steps to select and print a sample object from the printer's menu.
Details settings for buzzer, auto heat, language, and restoring defaults.
Provides access to statistics, system version, and filament status information.
Details printer usage statistics, including lifetime printing time and last task time.
Displays the printer's system version information.
Provides detailed filament status, showing remaining length and total capacity.
Displays the proper working temperatures for the printer's extruder and print bed.
Visual flowchart outlining the steps for print bed calibration.
Detailed instructions for adjusting the print bed screws for optimal calibration.
Information on interpreting calibration results and identifying success or failure.
Guidance on resolving calibration errors like 'ERR,ERR,ERR'.
Information on suitable software for the printer and automatic updates.
List and description of service codes and their corresponding display panel messages.
Instructions for using scraper, cleaning wire, and copper brush for maintenance.
Details key technical specifications of the da Vinci 1.0 3D printer, including dimensions and performance.
Addresses issues with calibration failure or print pollution from different filament colors.
Procedure for cleaning the heated bed after a print job is finished.
Instructions on how to empty the printer's drip box using the JOG MODE feature.
Details the warranty period and conditions for the product.
Lists warranty exclusions and provides information on how to contact for service.
To Next Page
