XYZ Printing da Vinci nano User Manual

Table of Contents
2
Product Overview
3
Printer Setup
6
Software Setup
7
Software Functional Descriptions
9
Maintenance
10
Troubleshooting
Thank you for purchasing da Vinci nano 3D printer. (Hereinafter referred to
as da Vinci nano. )This product is a small and portable 3D printer, you can
use da Vinci nano to take your imagination to a new level and bring any idea
to life.
Before you start printing, please read this manual to learn how to use da
Vinci nano correctly. This manual describes da Vinci nano safety instructions,
operating instructions, maintenance information and application tips. For
the latest information of da Vinci nano 3D printer, you can contact your local
Authorized Distributors or refer to the official website of XYZprinting. (http://
www.xyzprinting.com).
ENG
QUICK GUIDE
HD23FNAX085
XYZmaker is a software that is used to operate the da Vinci nano and prepare 3D models for
printing. Download XYZmaker from http://xyzptr.com/go2nano and install it on your computer.
First time installation requires an Internet connection.

XYZ Printing da Vinci nano Specifications

General

Brand	XYZ Printing
Model	da Vinci nano
Category	3D Printers
Language	English

Summary

Printer Setup

Unpacking

Step-by-step instructions for safely unpacking the 3D printer and its components.

Install the Guide Tube and Extruder Module

Detailed steps for installing the guide tube and connecting the extruder module.

Installing the Filament

Instructions for lowering the spool holder and placing the filament spool.

Software Setup

Load Filament

Printing

Guidance on preparing files, adjusting settings, and initiating the printing process.

Maintenance

Z-offset

Print bed calibration

Clean the nozzle

Troubleshooting

Error Code Troubleshooting

Lists common error codes, their causes, and recommended solutions.