Need help?Do you have a question about the XYZ Printing da Vinci Jr 1.0 Pro and is the answer not in the manual?
Display| display size | 2.6 inches |
|---|---|
| display type | FSTN LCM |
| display language | Multi language |
Printing Specifications| print technology | FFF (Fused Filament Fabrication) |
|---|---|
| print resolution | 100 - 400 microns |
| nozzle diameter | 0.4 mm, 0.3 mm (Optional) |
| filament diameter | 1.75 mm |
Operating Environment| operating temperature | 190℃ ~230℃ |
|---|---|
| storage temperature limit | 50℃ (122℉) |
| supported files | .stl, XYZ Format(.3w), g-code* |
System Requirements| operating system for PC | Windows 7 - 8 above |
|---|---|
| operating system for Mac | Mac OSX 10.9 64-bit above |
| hardware requirement for PC | X86 32/64-bit compatible PCs with 4GB+ DRAM |
| hardware requirement for Mac | X86 64-bit compatible Macs with 4GB+ DRAM |
Weight and Dimensions| dimensions | 16.54 x 16.93 x 14.96 inches |
|---|---|
| weight | 26.46 lbs |
| build volume | 5.9 x 5.9 x 5.9 inches |
Process for loading filament into the printer using the control panel.
Process for unloading filament from the printer using the control panel.
Steps for performing active print bed calibration for optimal first layer adhesion.
Guidance on interpreting calibration results and addressing 'FAIL' outcomes.
Steps to remove carbon deposits and filament dust from the printer nozzle.
Guide to adjust the nozzle-to-print bed gap for better print adhesion.
To Next Page
