XZENT X-F280 User Manual

8 9
Operation Buttons:
1. Return Press to return to the home screen.
2. List area The shown list area is depending on the currently selected category.
To see other settings you can scroll/swipe the list up and down or select
different category from the lower area.
3. General Contains general settings like language, date&time, ALT key assignment.
3(a) Press date to manually set a date (only possible if the sync modus is set to OFF).
3(b) Press time to manually set time (only possible if the sync modus is set to OFF).
3(c) 12/24: Press arrow keys to change 12/24h format.
3(d) Time zone: Press arrow keys to set a time zone (only possible if the sync
modus is set to OFF).
3(e) DAB+ Time sync mode: Press switch to ON/OFF setting.
3(f) ALT short press: Press arrow keys to assign a different function.
3(g) ALT long press: Press arrow keys to assign a different function.
3(h) Beep: Press switch to ON/OFF setting (Enable/Disable key press beeps).
3(i) WebLink: Press switch to ON/OFF setting *
  3(j)Language:Pressarrowkeystoselectlanguage.
3(k) Microphone: Press arrow key to change selected microphone.
3(l) Background: Press to select a different background.
DEVICE SETTINGS
4. Audio Containssettingforaudioandsoundadjustments.
4(a) Balance: Press arrow keys to shift the center to left or right position.
4(b) Fader: Press arrow keys to shift the center to front or rear position.
4(c) Equalizer:
Press to open EQ. You can select different EQ-Presets or manually
change the frequency bands to your liking.
   BalanceandFadercanalsobeopticallyadjustedorLPF,Subwoofer
   levelandLoudnesscanbeadjusted.
4(d) Navi Mixer: Press switch to activate or deactivate mixing of navigation
voice and background audio.
4(e) Startup volume: Press more key. Here you can change individually all
available sources in regard of startup volume.
   Youcanchoosetoapplythelastusedvolume,orsetaxvolumeonstartup.
5. TFT Hereyoucanadjustsettingsinregardofthescreenforexamplebrightness
mode or brightness values.
5(a) TFT brightness day: Press arrow keys to set value for day mode.
5(b) TFT brightness night: Press arrow keys to set value for night mode.
5(c) Dim mode: Press arrow keys to set value.
   Auto:thebrightnessisadjustedautomaticallywithswitchingonthefront
headlights of the vehicle (Night).
Day: the brightness is permanently at day value.
Night: the brightness is permanently at night value.
5(d) Touchscreen Auto Standby: On set idle time, the screen will be powered
off when not operated (audio will continue in background).
6. Camera Enablesyoutoadjustsettingsontheconnectedrearviewcamera.
  6(a)Rearviewcamera:Pressarrowkeystoadjustvalue.
6(b) Reverse Mute: Press to change value (Volume 50%, Mute 0% or 100% no muting)
6(c) Reverse delay: Press arrow keys to change the delay time until the cam
view auto closes after leaving reverse gear.
  6(d)Camerapicture:Pressarrowkeystoadjustvalue(normalorhorizontal
mirrowed).
7. Miscellaneous Hereyoucanndinformationonthesoftwaredeviceversionandloadfactory.
  7(a)Factorydefault:Pressmorekeyandconrmtoperformafactoryreset.
7(b) Software version: Press more key to show the device system software version.
Note:
* This feature will become available via future software update, if not present on device upon market
launch
1
2
3 4 5 6 7

XZENT X-F280 Specifications

General

Bluetooth	Yes
Apple CarPlay	Yes
Android Auto	Yes
Touchscreen	Yes
GPS Navigation	Yes
Rear View Camera Input	Yes
Screen Resolution	1024x600
USB	Yes
Radio	FM
Expandable Storage	Yes
Supported Video Formats	AVI, MOV, MP4, MKV
Supported Audio Formats	MP3, WMA