20
8) On completing work, stop the wood-cutter.
To stop it, if it is an electric model, press
the red push button on top of the electric
motor (10 Fig. 1). For models with PTO
transmission: disengage the PTO, stop the
tractor and uncouple the cardan shaft.
2.0.2 ELECTRIC MOTOR
The electric motor may be furnished with a
power supply of 220V or 380V, depending on
the model.
In the event of the motor breaking down, call
competent personnel authorized by the
Manufacturer.
Fig. 10
Fig. 11
ENGLISH - OPERATING INSTRUCTIONS
To Next Page
Loading...