Yada ROADCAM PLUS - Additional Features

18
Automatic ON / OFF
When the camera is connected to the vehicle’s power, it will power on and
start recording when the vehicle engine starts. When the engine is off, the
camera will stop recording and power off automatically.
Smart Incident Recording
When the G-Sensor detects a sudden impact such as collision, it’ll
automatically lock and store the footage in the “Event” folder so that it
doesn’t get overwritten by the loop record feature.
NOTE: The G-Sensor sensitivity can be adjusted in the video setting
page according to actual needs.
Park & Record Mode
The Park & Record mode allows the camera to record videos when an
impact is detected while the vehicle’s engine is off. The camera will power
on automatically and record a 20-second video clip then shut down.
NOTE: The camera will switch to Park & Record mode when the vehicle’s
engine is off.
ADDITIONAL FEATURES