Installation of the battery(If applicable)
Ways to install battery:
1.Battery box cover
2.Battery handle
3.Power wire plug
Power off
Power on
Lock hole
Seat lock/Anti-theft lock
Battery box lock
15 16
4.OPERATE INSTRUCTION
1.Rotate power lock to seat cushion open position,
open seat cushion and then turn off the air switch.
2.Rotate power lock to battery box cover open position
to open the battery box cover.
3.Put the battery into battery box, connect the power wire
plug well, and then close the cover.
4.Turn on air switch, put down the swat cushion.
Ways to take out the battery:
1.Rotate power lock to seat cushion open position,
open seat cushion and then turn off the air switch.
2.Rotate power lock to battery box cover open
position to open the battery box cover.
3.Pull off the power wire plug and take out the battery.
1 2 3
Power lock switch
1.Power on: Press the key at /Lock position, the
speedometer will display , then rotate the key clockwise
to position in 20S.
2.Power off:
①Turn off to gear , and press the key button, the vehicle
will anti-theft automatically after 3S.
②Turn off to gear , take the remote control away from vehicle
over 2 meters, the vehicle will anti-theft automatically after 3S.
③Turn off to gear , without leaving, the vehicle will
anti-theft automatically after 20S.
3.Seat lock and handlebar lock:
Press the key button at gear, the speedometer displays ,
rotate the key button counterclockwise to PUSH position
to open the seat cushion. Press the button and rotate
to LOCK position to lock the handlebar.
4.Open battery box: First lock the handlebar, and then
rotate the key button at LOCK gear counterclockwise.
To Next Page
Loading...
Need help?
General
