Yadea E8S PRO User Manual (English)

Questions and Answers:

L
Linda MedinaAug 10, 2025
How to improve Yadea E8S PRO Scooter range after charge?
- C
  crystalsmithAug 10, 2025
  If your Yadea Scooter's range is less than expected after a full charge, several factors could be responsible. Check if the tire pressure is insufficient and inflate the tire to the standard air pressure. Ensure that the battery is fully charged by checking the charger. Battery aging could also be a factor, and you may need to contact an authorized service station to replace the battery. Also, adjust the brakes to ensure the front and rear wheels rotate smoothly.
J
johncollinsAug 20, 2025
What to do if Yadea E8S PRO speed control handle fails?
- W
  Wayne SchmidtAug 20, 2025
  If your Yadea Scooter instrument panel displays normally after powering on, but the speed control handle isn't working, there are several potential causes. It could be due to low battery voltage, in which case you should try charging the scooter. Another possibility is a failure in the brake handle, requiring repair or replacement of the power-off brake handle. The speed control handle itself might also be faulty and need replacement. For controller or motor failure contact the authorized service station for inspection and maintenance.
K
Kevin AbbottAug 29, 2025
Why my Yadea Scooter is not electrifying?
- D
  Douglas Shepherd IIIAug 29, 2025
  If your Yadea Scooter isn't electrifying at all, it could be due to several reasons. The power lock might be faulty, requiring repair or replacement of the lock or its connector. Another cause could be a broken fuse, which needs to be identified and replaced. Lastly, there might be poor contact in the circuit; try refixing the plug of the power cord.