Yadea Z3 User Manual

The operation mode of starting the protection function (P gear) is as follows:
Unlock the P gear: Turn on the power lock and press the P-gear switch.
When the display interface of the instrument changes from the " P" to the " GO" ,
the P gear is unlocked and the whole scooter can ride at this time.
Locking of P gear: when the P gear is unlocked and the scooter is not riding,
press the P gear switch again and the P gear will be locked; Or if the motor stops
rotating for more than 120 seconds after riding, the p gear will be locked automatically.
After the P gear is locked, the instrument display interface will change to the " P", and
the whole scooter will not be able to ride at this time. If you want to ride the scooter,
you need to press P gear again.
12 13
Overtaking switch
Overtaking symbol
High beam symbol
Dipped headlight symbol
Double flash symbol
Press the upper side to turn on the high beam
Press the lower side to turn on the dipped headlight

Yadea Z3 Specifications

General

Brand	Yadea
Model	Z3
Category	Scooter
Language	English