Need help?Do you have a question about the Yaesu FC-757AT and is the answer not in the manual?
General| Frequency Range | 1.8 - 30 MHz |
|---|---|
| Power Handling | 150 W |
| Tuning Method | Automatic |
| Impedance | 50 Ohms |
| Power Supply | 13.8 V DC |
| Dimensions | 220 x 100 x 230 mm |
| Input VSWR | 1.5:1 or less |
| Tuning time | Approx. 3 seconds |
Details frequency ranges and impedance matching capabilities.
Specifies voltage, current, and size/weight parameters.
Controls the unit's power and its interaction with the transceiver.
Selects meter functions for SWR or power output.
Adjusts auto-tune system's SWR threshold sensitivity.
Manual band selection and control mode switching.
Pre-operation checks and automatic vs. manual control setup.
Step-by-step guide for automatic impedance matching.
Steps for manual impedance adjustment and receiving-only matching.
Procedure to balance the CM coupler for accurate readings.
Calibrating the power output meter indication.
Calibrating the SWR meter for accurate measurements.
Setting capacitor sensor positions for CPU control.
To Next Page
