Need help?Do you have a question about the Yaesu FT-411 and is the answer not in the manual?
General| Mode | FM |
|---|---|
| RF Power Output | 5 W |
| Antenna Impedance | 50 ohms |
| Weight | 450g |
| Battery | FNB-10 (7.2 V, 600 mAh) |
| Frequency Range | 144-146 MHz |
| Current Drain/Consumption | 1.5A transmit, 60mA receive |
Identifies and describes the controls and connectors on the top panel.
Details controls and indicators on the front and side panels.
Step-by-step instructions for removing and replacing the battery pack.
Instructions for installing the optional subaudible CTCSS tone squelch unit.
Procedure for setting the noise squelch threshold for clear reception.
Methods for tuning frequencies and changing channel step sizes.
Instructions on how to transmit, including power level selection.
Detailed steps for storing frequencies and settings in memory channels.
Procedure for activating and configuring the transceiver's scanning modes.
How to monitor a priority memory channel while operating elsewhere.
Procedure to reset all settings to factory defaults.
Troubleshooting common issues and solutions for the transceiver.
To Next Page
