To Next PageTo Next Page
Need help?Do you have a question about the Yaesu FT-450D and is the answer not in the manual?
General| Product type | Portable CB radio |
|---|---|
| Product color | Black |
| Housing material | Aluminum |
| Microphone included | Yes |
| Input voltage | 13.8 V |
| Display type | LCD |
| Output power | 100 W |
| Frequency range | 0.03 - 56 MHz |
| Channels quantity | 500 channels |
Weight and Dimensions| Depth | 217 mm |
|---|---|
| Width | 229 mm |
| Height | 84 mm |
| Package weight | 40000 g |
IPO/ATT, DSP, ON/OFF, NB, AGC button functions.
SHIFT Knob, DSP/SEL Knob, CLAR Button functions.
MAIN DIAL Knob, AF GAIN, SQL/RF GAIN Knob.
Details antenna and power connections.
For safety and performance.
Steps for receiving signals.
Steps for transmitting.
Explanation of knob functions.
VFO/Memory, Menu, and Full resets.
How to use the menu.
Changing MAIN DIAL and DSP/SEL steps.
Adjusting RF gain.
Reducing ignition noise.
Adapting to signal fading.
Perturbing IF passband.
Varying DSP filter passband.
Varying DSP IF passband width.
Slicing out interfering signals.
Reducing random noise.
Adjusting receiver gain levels.
Steps for operating the internal ATU.
Basic transmission procedures.
Adjusting output power.
Setting mic gain for optimal audio.
Separate transmit/receive frequencies.
Configuring for straight key or emulation.
How to use the internal keyer.
Setting CW keyer speed.
Matching transmit frequency.
Receiving on opposite sideband.
Steps for FM mode.
Shift direction and CTCSS.
Receiver silent until matching CTCSS.
Storing and recalling memories.
Scanning VFO or memory channels.
Initiating and controlling scan.
Limiting scan within specific ranges.
Enabling the channel.
Accessing and using the channel.
