Yaesu FT-950 - CAT OPERATION REFERENCE BOOK User Manual

FT-950 CAT OPERATION REFERENCE BOOK
CAT
(
COMPUTER AIDED TRANSCEIVER
)
OPERATION
FT-950
CAT O PERATION
R EFERENCE B OOK

Yaesu FT-950 - CAT OPERATION REFERENCE BOOK Specifications

General

IF DSP	Yes
Antenna Connector	SO-239
Current Consumption	22 A (Max)
CAT Interface	Yes
Frequency Range	30 kHz - 56 MHz
Mode	SSB, CW, AM, FM
Receiver Type	Triple Conversion Superheterodyne
Power Supply	13.8 V DC
Baud Rate	4800, 9600 bps
Output Power	100 W (SSB, CW, FM), 40 W (AM)

Summary

FT-950 CAT Operation Basics

Overview of CAT System

Introduction to the CAT system, its functions, and connection requirements for the FT-950 transceiver.

CAT Jack Connection Details

Details the pin configuration and functions of the CAT jack on the FT-950 transceiver for computer connection.

FT-950 CAT Command Structure

Command Syntax and Parameters

Explains how commands are structured with parameters and terminators, and common mistakes.

Command Terminator Usage

Details the role of the semicolon as a command terminator.

FT-950 CAT Command Reference List

FT-950 Detailed CAT Command Tables

CAT Commands AB to BI

Details parameters and functions for CAT commands AB through BI.

CAT Commands BP to CS

Details parameters and functions for CAT commands BP through CS.

CAT Commands CT to EU

Details parameters and functions for CAT commands CT through EU.

CAT Command EX Details

Details parameters and functions for the CAT command EX.

CAT Commands FA to ID

Details parameters and functions for CAT commands FA through ID.

CAT Commands IF to LK

Details parameters and functions for CAT commands IF through LK.

CAT Commands LM to MR

Details parameters and functions for CAT commands LM through MR.

CAT Commands MS to OI

Details parameters and functions for CAT commands MS through OI.

CAT Commands OS to QR

Details parameters and functions for CAT commands OS through QR.

CAT Commands QS to RM

Details parameters and functions for CAT commands QS through RM.

CAT Commands RO to SM

Details parameters and functions for CAT commands RO through SM.

CAT Commands SQ to UP

Details parameters and functions for CAT commands SQ through UP.

CAT Commands VD to XT

Details parameters and functions for CAT commands VD through XT.