Need help?Do you have a question about the Yaesu FT-991 CAT and is the answer not in the manual?
Explains serial cable connection and settings for the FT-991 transceiver.
Details USB cable connection and required driver download from the Yaesu website.
Commands consist of two alphabetical characters, case-insensitive.
Parameters specify information for commands; configuration requires careful attention to format.
A semicolon (;) is used to signal the end of a command.
Explains serial cable connection and settings for the FT-991 transceiver.
Details USB cable connection and required driver download from the Yaesu website.
Commands consist of two alphabetical characters, case-insensitive.
Parameters specify information for commands; configuration requires careful attention to format.
A semicolon (;) is used to signal the end of a command.
General| IF DSP | Yes |
|---|---|
| Receiver Type | Triple Conversion Superheterodyne |
| Power Supply | 13.8 V DC ±15% |
| Modes | AM, FM |
| RF Power Output | HF/50MHz: 100W |
| Weight | 4.3 kg |
| Type | All Mode Transceiver |
| Display | 3.5 inch TFT Full Color Touch Panel |
| Antenna Connectors | SO-239 |
To Next Page