To Next PageTo Next Page
Need help?Do you have a question about the Yaesu FTM-10R and is the answer not in the manual?
General| Brand | Yaesu |
|---|---|
| Model | FTM-10R |
| Category | Transceiver |
| Language | English |
Describes the radio's small size and design for versatile mounting.
Details the quick-release front panel holder and easy installation.
Highlights user-friendly controls for glove operation and ergonomic design.
Mentions the front panel's IP57 rating for motorcycle handlebar mounting.
Describes the bright LED and Ocean Blue LCD for viewing.
Explains the function of the top panel keys for selecting operations.
Describes the function of the PTT key for transmitting and receiving.
Details how to use the VOL/SEL key for audio level adjustment and mute function.
Explains the F key, dial knob functions for frequency, volume, and menu navigation.
Explains how to use the keys to switch operating bands.
Details how to connect the radio to a car battery using the DC power cable.
Explains connecting an antenna using coaxial cable.
Identifies various indicators on the LCD screen like S- & PO Meter, Operating Band, etc.
Guides on checking the transceiver for damage immediately after unpacking.
Provides advice on proper installation for longevity and performance.
Crucial safety precautions for handling RF energy and device installation.
Details on installing the transceiver in a vehicle, including power and antenna considerations.
Instructions for safely connecting the transceiver to the vehicle's battery.
Advice on selecting and connecting antennas, including coaxial cable considerations.
Step-by-step instructions for physically separating the front panel from the main unit.
Steps for installing the transceiver without separating the front panel.
Explains how to turn the transceiver on/off and switch between operating bands.
Describes how to transmit, including PTT key usage and microphone operation.
Explains how to monitor two signals simultaneously.
Describes the Automatic Range Transponder System for proximity alerts.
Details how to adjust the display brightness level.
Explains the horn alert feature with various sounds.
Describes how to use the intercom feature with optional Bluetooth accessories.
Explains how to temporarily disable squelch for monitoring weak signals.
Describes using the transceiver as a public address system with an external speaker.
Explains the reverse feature for checking repeater input frequencies.
Details how to use the scanner to search for active frequencies.
Explains the smart search feature for automatically loading active frequencies.
Guides on adjusting the squelch threshold to mute background noise.
Details how to select transmit power levels to conserve battery.
Step-by-step guide on storing frequencies and associated data into memory channels.
Explains how to recall stored memory channels using Group or In-band modes.
Lists functions for customizing memory channels like grouping, sorting, and tagging.
Describes how to append alphanumeric tags (labels) to memory channels.
Explains different memory channel scanning methods.
Details setting up a preferential scan list by skipping or flagging channels.
Explains how to change the CTCSS Tone Frequency for memory channels.
Details how to change the DCS Tone Code for memory channels.
Explains how to set CTCSS/DCS mode, tone frequency, and DCS code.
Describes storing independent transmit frequencies for non-standard repeater shifts.
Details setting individual transmit power levels for memory channels.
Explains how to delete memorized data from memory channels.
Instructions for accessing the special Club Channel.
Explains how to monitor the Club Channel periodically.
Step-by-step instructions for programming messages for transmission.
Guides on programming a member list with personal IDs for message identification.
Details how to copy programmed messages and IDs wirelessly.
Describes how to send programmed messages to members.
Details the cloning process for transferring data between transceivers.
Instructions for changing the frequency of the Club Channel.
Step-by-step guide to setting the internal clock.
Explains how to activate and display the current time.
Details the operation of the stopwatch timer function.
Explains the operation of the interval timer function.
Describes how to temporarily mute the receiver audio volume.
Explains the key lockout feature to prevent accidental changes.
Details the automatic audio volume control for noisy environments.
Describes how the DIAL knob function behaves after a period of inactivity.
Explains the VOX (Voice Operated Transmit) feature for hands-free transmission.
Guides on adjusting the VOX sensitivity level.
Instructions for listening to AM/FM broadcast stations.
Details the Time-Out Timer feature to limit transmission duration.
Explains how to output audio from external devices like iPods.
Step-by-step guide for pairing the Bluetooth headset with the transceiver.
Instructions for enabling and configuring Bluetooth functions like PTT and VOX.
Explains how to monitor two frequencies simultaneously, with various modes.
Details how to set up CTCSS for repeater access and tone squelch.
Explains how to set up Digital Code Squelch for enhanced tone access control.
Guides on storing CTCSS tone pairs for EPCS paging and selective calling.
Details on activating the Enhanced CTCSS Paging & Code Squelch feature.
Explains accessing WiRESTM nodes in SRG mode via DTMF codes.
Details programming DTMF strings for accessing Internet Link Systems in FRG mode.
Instructions for accessing FRG nodes and sending DTMF strings.
Step-by-step guide to loading telephone numbers into DTMF memory registers.
Explains how to transmit stored DTMF numbers, including microphone usage.
Details manual selection of repeater shifts and setting offsets.
Explains the Automatic Repeater Shift (ARS) feature for automatic shift activation.
Guides on enabling expanded receive frequency bands.
Instructions for recalling and scanning weather broadcast channels.
Explains the NOAA weather alert notification system.
Details how to change the tuning step increments for frequency tuning.
Guides on changing the receiving mode (FM, AM, etc.) for different signals.
Explains how to change the PTT key operation between MOMENT and TOGGLE.
Details how to turn the key beeper function on or off.
Describes assigning or excluding functions for the top panel keys.
Guides on selecting the repeater shift direction (RPTR-, RPTR+, RPTR OFF).
Details how to set the magnitude of the repeater shift.
Explains how to disable the Automatic Repeater Shift function.
Guides on programming the microphone's [PGM] key for quick access to functions.
Explains how to configure the scanner to treat amateur bands as independent or one band.
Details the different scan resume modes (BUSY, HOLD, TIME).
Guides on selecting the scan direction (NORMAL or RETURN).
Explains how to set the initial scan direction (UP START or DN.START).
Details split tone operation for repeaters using mixed CTCSS/DCS control.
Guides on setting up bell alerts for incoming calls using CTCSS/DCS/EPCS.
Explains how to display the vehicle's battery voltage.
Guides on displaying the internal temperature of the transceiver.
Details how to select the display format for the clock.
Guides on selecting the time system (12H or 24H).
Explains how to set an alarm beep.
Details programming timed intervals for beeps and LED flashes.
Explains the APO feature to automatically turn off the radio after inactivity.
Guides on selecting receiver audio responses for comfortable reception.
Details the feature that alerts when volume levels are set to specific presets.
Explains how to select the audio output speaker (REAR, FRONT, F+R, OFF).
Guides on selecting stereo or monaural audio output.
Details adjusting microphone gain levels.
Explains how to lock the PTT key when the LOCK mode is active.
Details the Automatic Audio Volume Controller function and its settings.
Explains the AF DUAL operation for monitoring two frequencies.
Guides on selecting the tone pitch for received audio.
Details the Volume Setting Alert feature and its options.
Explains the function of the DIAL knob and display settings.
Guides on enabling or disabling the key beeper.
Details enabling/disabling the battery saver for the Bluetooth headset.
Explains enabling/disabling Bluetooth function and VOX operation.
Guides on activating/disabling the internal clock and timer.
Details activating the Club Channel Monitor feature.
Guides on displaying the DC supply voltage.
Details setting the display illumination level.
Explains programming the DTMF Autodialer.
Guides on selecting categories for top panel key recall.
Details assigning functions to the Function Key.
Guides on programming a member list for message features.
Details setting the personal ID for message features.
Guides on programming messages.
Details adjusting microphone gain level.
Guides on selecting functions for the microphone's PGM key.
Guides on enabling/disabling Enhanced CTCSS Paging & Code Squelch.
Details enabling/disabling PTT key lock.
Guides on selecting the PTT key function.
Guides on enabling/disabling Automatic Repeater Shift.
Details setting the repeater shift direction.
Guides on setting the magnitude of the repeater shift.
Details enabling/disabling band expansion.
Guides on shifting CPU clock frequency for spurious responses.
Details selecting the receiving mode.
Guides on selecting the scan range.
Details selecting the scan type.
Guides on selecting the scan resume mode.
Details selecting the scan start direction.
Guides on selecting the speaker output.
Details selecting the number of CTCSS/DCS/EPCS bell ringer repetitions.
Guides on setting the DCS code.
Details enabling/disabling split CTCSS/DCS coding.
Guides on setting the squelch threshold level.
Details setting the CTCSS Tone Frequency.
Guides on selecting the Tone Encoder/Decoder mode.
Details setting the synthesizer steps.
Guides on selecting the audio output mode.
Details setting the Time-Out Timer.
Guides on selecting the transmit power output level.
Details setting the intercom volume level.
Guides on enabling/disabling VOX operation.
Details setting the VOX sensitivity.
Guides on enabling/disabling the Internet Connection feature.
Details enabling/disabling the Weather Alert Scan feature.
Step-by-step instructions for installing the MEK-M10 microphone jack.
Step-by-step instructions for installing the BU-1 Bluetooth adapter unit.
Step-by-step instructions for attaching the CAB-1 charger sleeve.
Details how to reset the microprocessor to factory defaults, erasing all memories.
Provides solutions for common operational issues and error conditions.
Lists general specifications like frequency range, channel steps, and power requirements.
Details receiver circuit type, intermediate frequencies, and sensitivity.
