Yaesu FTM-400XDR Quick Start Guide

Using WIRES-X Node Operations after the
DG-ID function update
FTM-400XDR/XDE/DR/DE
1. Changing the WIRES-X node station setting
After this update, Change the DSQ of the node station to a DG-ID setting (00 to 99).
With this update, the conventional DSQ 001 to 126 cannot be used. After updating, set a DG-ID of 00 to
99 to the node station.
How to set the DG-ID of WIRES-X node station
1. Start the WIRES-X PC software on the PC.
2. From the “File” menu, click “Transceiver”.
The “Transceiver” window will appear.
3. Set the desired DG-ID.
DG-ID numbers that can be set (00 to 99)
Example
DG-ID Setting value
00 OFF
01 - 99 001 - 099
Be sure to select a DG-ID setting from 00 to 99.
4. Click “OK” to complete the setting.

Yaesu FTM-400XDR Specifications

General

Modulation Modes	FM, C4FM (Digital)
Memory Channels	1000
Digital Modes	C4FM (System Fusion)
Supply Voltage	13.8 V DC
Waterproof	No
Display	Full-color TFT LCD
GPS	Yes
Channel Steps	5/6.25/10/12.5/15/20/25/50 kHz
APRS	Yes
Frequency Range	144-148 MHz, 430-450 MHz