Yaesu FTM-350R User Manual

DUAL BAND FM TRANSCEIVER
FTM-350R
OPERATING MANUAL
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
VERTEX STANDARD
(
AUSTRALIA
)
PTY., LTD.
Normanby Business Park, Unit 14/45 Normanby Road
Notting Hill 3168, Victoria, Australia
FCC ID: K6620335X40
IC: 511B-20335X40

Yaesu FTM-350R Specifications

General

GPS	Built-in
Supply Voltage	13.8 V DC
Operating Temperature Range	-10°C to +60°C
APRS	Yes
Voltage	13.8 V DC
Antenna Connector	SO-239
Frequency Range	144-148 MHz
Modes	FM
Output Power	50W (VHF), 35W (UHF)
RF Power Output	50W (VHF), 35W (UHF)
Channel Steps	10 kHz, 12.5 kHz, 15 kHz, 20 kHz, 25 kHz

Summary

Front Panel Controls & Switches

[FWD]/[BCK](PAGE) KEY

Key for navigating function pages and toggling Dual Receive.

[SET](SET MODE) KEY

Accesses the Set Mode menu for configuration options.

Left Side [DIAL] KNOB

Selects frequency/channel for the left receiver and other functions.

Left Side [VOL] KNOB

Adjusts the audio volume for the left side receiver.

[SMART FUNCTION] KEY

Selects important operating features; functions change based on context.

[PTT] KEY

Push-to-talk button for transmitting audio.

[B](BAND) KEY

Changes the operating band of the Main receiver.

[F](FUNCTION) KEY

Changes current functions of [SMART FUNCTION] keys.

Right Side [VOL] KNOB

Adjusts the audio volume for the right side receiver.

Right Side [DIAL] KNOB

Selects frequency/channel for the right receiver and other functions.

[POWER] SWICTH

Toggles the transceiver's power on and off.

Timer Page Operation

Clock

Displays and sets the current time.

Count Up Timer

Operates a timer that counts up, with optional lap function.

Count Down Timer

Operates a timer that counts down, with optional lap function.

Radio Page Basic Operation

Basic Operation Steps

Guides through essential radio functions like power, volume, and tuning.

Smart Function Key Operations

General

Explains how the Smart Function keys work and their general purpose.

Command Details

Lists specific functions and commands for each Smart Function key.

Memory Operation

Memory Storage

Procedures for saving frequencies and settings into memory channels.

Storing Independent Transmit Frequency

How to store transmit frequencies for repeater offsets ("Odd Split").

Memory Recall

Steps to retrieve stored memory channels.

Memory Edit

Instructions for labeling, copying, and deleting memory channels.

Memory Channel Sort

How to sort and renumber memory channels by frequency.

AF Dual Operation

AF Dual Functionality

Allows monitoring amateur bands while listening to FM broadcast stations.

Band Scope Operation

General Band Scope Use

Overview of viewing channel activity in VFO mode.

Enhanced Band Scope Mode

How to use the expanded Band Scope features via Special Function mode.

CTCSS/DCS/EPCS Operation

CTCSS Operation

How to set up and use CTCSS tones for selective calling.

DCS Operation

How to set up and use DCS codes for selective calling.

EPCS Operation

Utilizes CTCSS tone pairs for paging and selective receiving.

Scan Operation

VFO Scan

Initiates and stops scanning frequencies in VFO mode.

Memory Scan

Initiates and stops scanning stored memory channels.