To Next PageTo Next Page
Need help?Do you have a question about the Yaesu FTM-350 Series and is the answer not in the manual?
General| Digital Voice | No |
|---|---|
| Operating Modes | FM, APRS |
| Frequency Range | 144-148 MHz, 430-450 MHz |
| Weight | 1.2 kg |
| GPS | Built-in |
| Supply Voltage | 13.8V DC |
| Output Power (VHF) | 50W |
| Dimensions | 140 x 40 x 180 mm |
| Channel Steps | 5/6.25/10/12.5/15/20/25/50/100 kHz |
Overview of initial setup steps for APRS operation.
Explains how to operate APRS with or without a GPS antenna unit.
Details how to manually enter longitude and latitude for APRS.
Guide to setting up your callsign and SSID for APRS operation.
Instructions on enabling the APRS modem function on the transceiver.
Details the radio display and key functions for APRS operation.
Describes the Station List window and its associated key functions.
How to select specific types of APRS data to receive based on filters.
How to navigate to a specific APRS station using GPS data.
How to manually send an APRS beacon from various windows.
Setting up the transceiver to automatically transmit APRS beacons.
Configuring the time intervals for automatic APRS beacon transmission.
Configuring SmartBeaconing parameters for adaptive beacon transmission.
Storing and transmitting custom status messages with APRS beacons.
Setting up digipeater paths for APRS packet transmission.
Programming callsigns or aliases for specific digipeater paths.
How APRS messages are received and displayed, including alerts.
Details the Message List window and associated key functions.
Explains the APRS Message data window and its controls.
Procedures for entering and editing messages for transmission.
Details on transmitting messages and receiving acknowledgments.
Manually replying to received APRS messages.
Configuring automatic replies to received APRS messages.
Enables/disables automatic APRS beacon transmission and its parameters.
Details on automatic transmission modes, intervals, and speed-dependent behavior.
Configures COM port settings for connecting external devices.
Selects the APRS packet path for digipeater routing.
Configures parameters for adaptive APRS beacon transmissions.
Details on high-speed transmission rates, turn angle, slope, and time parameters.
