Need help?Do you have a question about the Yaesu VX-1R and is the answer not in the manual?
General| Brand | Yaesu |
|---|---|
| Model | VX-1R |
| Category | Transceiver |
| Language | English |
Details general technical specifications of the transceiver.
Outlines transmitter power output, modulation, and emissions.
Lists receiver circuit type, intermediate frequencies, and sensitivity.
Lists items included in the VX-1R package.
Lists optional accessories available for purchase for the VX-1R.
Instructions for attaching the supplied antenna and precautions.
Guide for installing the rechargeable Lithium-Ion battery pack.
Comparison of battery life for FBA-20 and FNB-52LI packs.
How to power the transceiver using the AC adapter.
Description of buttons and switches on the front of the transceiver.
Functions of controls on the top and sides of the transceiver.
Explanation of the LCD screen and status LEDs.
Locations for microphone, speaker, and power connections.
Icons related to memory, band limits, and scanning modes.
Displays for Dual Watch, power levels, battery saver, and function modes.
Icons for CTCSS, DCS, key lock, bell alarm, and low battery.
Icons for automatic power off and battery saver status.
Procedure for turning the transceiver on and off.
How to set the audio volume using the Dial.
How to set and adjust the squelch for clear reception.
How to choose between different frequency bands.
Explains different ways to tune frequencies using the Dial and keys.
Steps for transmitting, including power level indication.
How to receive FM broadcast and TV audio channels.
How to receive AM broadcast stations.
Procedure for auto-scanning and storing FM/TV channels.
Modifying frequency step size and reception mode.
Controlling automatic mode changes based on frequency.
Understanding repeater offsets and automatic shift features.
Manually setting repeater shifts when ARS is off.
Adjusting default repeater shift values for different regions.
How to monitor the repeater's input frequency.
Steps to set up CTCSS tone frequency and mode for repeater access.
A table listing available CTCSS tone frequencies.
How to set up DCS tone code and mode for repeater access.
A table listing available Digital Code Squelch codes.
How to select between High and Low power output.
Setting a limit for transmission duration to save battery.
Prevents transmission on an occupied channel.
How to enable sleep cycles to reduce battery drain.
Turning off the BUSY/TX indicator for battery conservation.
Automatically turns off the radio after a period of disuse.
Prevents accidental changes to settings or transmissions.
Customizing the Dial's role for tuning or volume/squelch.
Turning off audible beeps from key presses.
Manually generating DTMF tones for repeater control.
Storing and sending DTMF sequences for autopatch use.
Explains memory groups and basic storage procedures.
Accessing, updating, and using stored memory channels.
Storing separate Tx/Rx frequencies for non-standard repeaters.
Covers Home Channels, loading memories into VFO, and masking.
Setting resume behavior and scanning VFO bands.
Scanning stored memories and setting custom band limits.
Choosing between Single and Continuous Smart Search modes.
How the radio automatically stores active frequencies.
How to activate and configure the ARTS feature.
Procedure for accessing the transceiver's setting menu.
Addresses battery, antenna, and microprocessor problems.
Procedures for SET Mode and Hard resets for microprocessor issues.
Shifting clock frequency to eliminate spurious signals.
To Next Page
