VX-8DR/DE OPERATING MANUAL164
APRS/GPS Set Mode Item 5: APRS MSG FLASH
Function: Enables/Disables the white LED light when the APRS message is received.
Ava il ab le Value s :MSG:OFF / 2sec - 10sec (2sec/step) / 20sec / 30sec / 60sec /
CONTINUOUS / EVERY 2s - EVERY 10s (1sec/step) /
EVERY 20s - EVERY 50s (10sec/step) /
EVERY 1m - EVERY 10m (1min/step)
GRP: OFF / 2sec - 10sec (2sec/step) / 20sec / 30sec / 60sec /
CONTINUOUS
BLN: OFF / 2sec - 10sec (2sec/step) / 20sec / 30sec / 60sec /
CONTINUOUS
Default: MSG: 4sec, GRP: 4sec, BLN: 4sec
MSG: When you receive a personal message, the white LED light flashes according to
the setting of this item.
GRP: When receive the group message, the white LED light flashes according to the
setting of this item.
BLN: When receive the bulletin message, the white LED light flashes according to the
setting of this item.
APRS/GPS Set Mode Item 6: APRS MSG TXT
Function: Programming the Fixed form APRS Message.
See page 91 for details.
APRS/GPS Set Mode Item 7: APRS MUTE
Function: Enables/Disables audio output of the “B-Band” during APRS operation.
Ava il ab le Value s : ON/OFF
Default: OFF
APRS/GPS Set Mode Item 8: APRS RINGER MSG
Function: Enables/Disables the alert ringer when the APRS message is received.
Ava il ab le Value s : ON/OFF
Default: ON
APRS/GPS Set Mode Item 9: APRS RINGER BCON
Function: Enables/Disables the alert ringer when the APRS beacon is received.
Ava il ab le Value s : ON/OFF
Default: ON
APRS/GPS SET MODE
APRS/GPS SET MODE DETAILS
SETTING
EVERY 2sec - 5sec
EVERY 6sec - 9sec
EVERY 10sec - 50sec
EVERY 1min - 5min
EVERY 6min - 10min
LED LIGHT
Flash one time every setting interval
Flash two times every setting interval
Flash three times every setting interval
Flash four times every setting interval
Flash five times every setting interval
To Next Page
Loading...
