VX-8DR/DE OPERATING MANUAL 21
Adjust the VOX “Hang-Time” (the transmit-receive delay after the cessation of speech)
from the Set Mode Item 109: VOX DELAY. The default delay is 0.5 second. To set a
different delay time:
1. Press and hold in the key for one second to enter the Set mode.
2. Rotate the DIAL knob to select the Set Mode Item 109:
VOX DELAY.
3. Press the key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired delay time
(“0.5sec”, “1.0sec”, “1.5sec”, “2.0sec”, “2.5sec”, or
“3.0sec”).
5. When you have made your choice, press the PTT switch to
save the new setting and return to normal operation.
TRANSMISSION
OPERATION
To Next Page
