Yakima POWDERHOUND User Manual

PowderHound
Part #1031822 RevC
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL YAKIMA
RACKS AND ACCESSORIES BE
PROPERLY AND SECURELY
ATTACHED TO YOUR VEHICLE.
IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE
ACCIDENT, AND COULD CAUSE
SERIOUS BODILY INJURY OR
DEATH TO YOU OR TO OTHERS.
YOU ARE RESPONSIBLE FOR
SECURING THE RACKS AND
ACCESSORIES TO YOUR CAR,
CHECKING THE ATTACHMENTS
PRIOR TO USE, AND
PERIODICALLY INSPECTING THE
PRODUCTS FOR ADJUSTMENT,
WEAR, AND DAMAGE.
THEREFORE, YOU MUST READ
AND UNDERSTAND ALL OF THE
INSTRUCTIONS AND CAUTIONS
SUPPLIED WITH YOUR YAKIMA
PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO
NOT UNDERSTAND ALL OF THE
INSTRUCTIONS AND CAUTIONS,
OR IF YOU HAVE NO
MECHANICAL EXPERIENCE AND
ARE NOT THOROUGHLY FAMILIAR
WITH THE INSTALLATION
PROCEDURES, YOU SHOULD
HAVE THE PRODUCT INSTALLED
BY A PROFESSIONAL INSTALLER
SUCH AS A QUALIFIED GARAGE
OR AUTO BODY SHOP.
IF ROUND,
continue to
step 2 of
accessory
instructions..
Remove the tabs
with scissors or
pliers.
If you have
SQUARE BARS,
loosen the tabs
by bending them
repeatedly.
OR

Yakima POWDERHOUND Specifications

General

Category	Ski and Snowboard Rack
Locking System	Integrated SKS (Same Key System) locks
Capacity	4 snowboards or 6 pairs of skis
Compatibility	Fits most roof racks
Dimensions	Varies by model (check specific product details)

Summary

Important Safety Warnings

Initial Installation Preparation

Round Bar Mounting

If your crossbar is round, continue to the next step of accessory instructions.

Square Bar Mounting

For square bars, loosen or remove tabs by bending or using tools like pliers.

Installation Steps

Bar Type Adaptation

Instructions for round/square bars and use of optional MightyMount attachments.

Rack Attachment and Securing

Guidance on attaching the rack to the vehicle and ensuring it is properly closed.

Optional Accessories

Information on installing SKS locks and SkiLift for clearance adjustments.

Pre-Driving Checks and Safety

SkiLift Installation Procedure

Steps for installing the SkiLift accessory using the provided hex key and bolts.

Final Hardware Check

Ensure all hardware is secured before driving and check/tighten periodically.

Support and Warranty

Technical Assistance Contact

Provides contact details for technical support and replacement parts.

Limited Warranty Coverage

Details on the product's limited warranty, including coverage and exclusions.