Figure 47. Truck Serial Number
HOUR METERS
Use this submenu to view hour meter readings. These include a truck hour meter, traction hour meter, pump
hour meter (displayed only if the Master Controller is controlling the hydraulic pump), and a secure hour
meter. Secure hour meters cannot be reset. Figure 48 shows an example of the way hour meters and readings
are presented on the screen.
Figure 48. Hour Meters Screen
E-HYDRAULIC CONTROLLER VERSIONS
NOTE: The manufacturer's hardware and software versions may not match the hardware and
software versions shown on the device's exterior label.
Use this submenu to view the manufacturer's internal hardware and software versions of the E-Hydraulic
Input Controller.
NOTE: This item is visible only on trucks equipped with E-Hydraulics.
The manufacturer's hardware and manufacturer's software version information is presented on the screen as
shown in Figure 46.
PUMP MOTOR CONTROLLER VERSIONS
NOTE: The manufacturer's hardware and software versions may not match the hardware and
software versions shown on the device's exterior label.
To Next Page
Loading...