Yale HSA6000 series

Pack contents
• 1 x HSA6021 Pet friendly PIR detector
• 4 x wall plugs/cross head fixing
screws
PIR detector description
Status LED: Hidden red LED shines
through lens to indicate PIR status.
Learn/Test button: Used for testing the
radio performance (No sleep time) and
for learning-in.
Cover screw: Provides access to inside
of PIR
Tamper Spring: Spring loaded switch to
protect the PIR from being opened.
Tab Slot: Pull out plastic tab to activate
battery.
Corner fixing knockouts: Punch
through to provide holes for corner
fixing.
W
all fixing knockouts:
Punch through
to provide holes for flat mounting on
walls.
Batteries X 3: Battery compartment for
three AAA 1.5V alkaline cells.
Wirefree Yale HSA6021
Pet friendly PIR detector
(Yale part number: 666021001001)
Cover screw
Learn/Test
Button
Status
LED
Corner fixing
knockouts X 4
Wall fixing
knockouts X 2
Tab slot
+
++
B
atteries X 3
Tamper spring
HSA6000 series
Pet friendly PIR Manual-SA 1/10/09 9:58 am Page 1

Yale HSA6000 series Specifications

General

Series	HSA6000
Wireless Frequency	868MHz
Connectivity	Wireless
Power Source	Battery
Product Type	Security Sensor
Operating Temperature	+40°C
Compatibility	Yale Smart Alarm System

Summary

Specifications

Installation and Setup

Installation

Instructions for activating the battery and initial component start-up.

Programming & Testing

Guidance on programming the PIR before installation and testing afterwards.

Location

Recommendations for optimal mounting height and placement for pet immunity.

Operational Guidance

Limitations

Advice on avoiding common issues like facing doors, direct sunlight, or heat sources.

Tilt Tamper Detection

Explanation of the tilt tamper mechanism and tamper signals.